Installation
Thermostat
Overview
Thermostat
Setup
Advanced
Installer Menu
30 Installer’s Guide
Equipment
User Menus
Air Handler User Menus (cont.)
Setup
Parameter Options Comments
Return Air Sens Off, On
If Return Air Sensor is field installed, turn On.
Factory Default is Off
Supply Air Sens Off, On
If Supply Air Sensor is field installed, turn On.
Factory Default is Off
Reset All Dflts No, Yes
Resets the Air Handler to the Factory Default
Configuration by selecting Yes
Dipswitch*
Dipswitch Indications Comments
Cool Airflow XXXXCFM View Airflow Dipswitches
HT Pump Airflow XXXXCFM View Heat Pump Airflow Dipswitch Settings
Cool Air Adj -10%, 0%, 10% View Airflow Trim Settings
On-Demand Dehum On, Off Activate Dehumidification Feature
* Dipswitch status is not required when the system is set up for 4-wire
communications. It is only displayed when a conventional 24V thermostat
input is active.
To Next Page
Loading...
