Rheem Gladiator - Advanced Settings and Status Indicators

16
Vacation Setting Off
Heating Status
CLEAR
ALARM
VACATION 110
UNLOCK/LOCK
120
(3 SEC)
130 140 150
WiFi
SETUP
SERVICE NEEDED
SET POINT (°F)
CLEAR
ALARM
VACATION 110
UNLOCK/LOCK
120
(3 SEC)
130 140 150
WiFi
SETUP
SERVICE NEEDED
SET POINT (°F)
CLEAR
ALARM
VACATION 110
UNLOCK/LOCK
120
(3 SEC)
130 140 150
WiFi
SETUP
SERVICE NEEDED
SET POINT (°F)
Press RIGHT arrow until the desired
water temperature is shown on the
display.
When the water temperature indicator
is blinking, this means that a heating
element is on.
Blinking Indicator
Programming the Electronic Control
Setting The Water Heater Above 140°F
(Not Available on the EcoNet app)
CLEAR
ALARM
VACATION 110
UNLOCK/LOCK
120
(3 SEC)
130 140 150
WiFi
SETUP
SERVICE NEEDED
SET POINT (°F)
CLEAR
ALARM
VACATION 110
UNLOCK/LOCK
120
(3 SEC)
130 140 150
WiFi
SETUP
SERVICE NEEDED
SET POINT (°F)
Press and hold both arrow
buttons for 3 seconds to unlock
the keypad and allow water
temperatures above 140°F.
A press of the right arrow will
increase the water temperature
setting up to 150°F.
The keypad will not lock when
decreasing water temperatures
below 140°F.
DANGER: Hotter water
increases the potential for Hot
Water SCALDS.