Panic Pack Panel
Features include:
6 dedicated on-board wired zone inputs
Siren and strobe outputs (1 Amp rated)
On-board wireless transceiver
Local or remote upload/download
Plug-on Rhino GSM Module
Auto time/date update
500 event log
1.2 Amp power s upply
2 serial ports (RhinoBus/USB via FUSA)
Flash u pgradable (Remotely or local)
The Rhino Panic Pack panel is a panic system with 6 onboard inputs and a wireless transceiver to
allow support for wireless remote controls. The system is ideally suited to domestic and small
commercial installations.
The system provides both remote signalling and UDL connectivity.
Wireless Remote Controls
The Rhino Panic Pack can handle up to 100 remote controls. The system is shipped with one 6-button
remote which can be used to accept any panic signals that might be generated. Normal users will get
a single button panic only remote control which will only allow the user to activate the panic
remotely.
FSK USB Serial Adapter (FUSA)
The FUSA provides USB connectivity between the Rhino Panic Pack and the host computer. It is
required when a direct connection is required between the Rhino UDL software package and the
Rhino Panic Pack.
Rhino Upload/Download (UDL) Software
Rhino UDL is a Windows-based software package that can be used to remotely or locally program and
diagnose the Rhino range of security systems.
Features include:
Simple intuitive user interface
Local or remote connectivity via GSM modem
System remote control
Advanced system diagnostics
Log file download access
5
To Next Page
Loading...
Need help?
General
