RHINO PelcoD 2400bps on RS485 - Securview DVRDIAMOND DVR Configuration; DVR Camera Setup; DVR PTZ Property Settings

Securview DVRDIAMOND on ID01 and Pelco-D at 2400Bps
For 2 wire RS485 connection on rear of DVR:
RS485+ D+ (Tx+)
RS485- D- (Tx-)
Set the DVR to use the PTZ by going to ‘MENU’ > ‘SYSTEM’ > ‘CAMERA’ > ‘PTZ SETUP’, and setting
‘Camera #’ to ‘PELCO D (2400)’.
© Copyright 2009 RhinoCo Technology Page 8