Owner’s Manual
6
PROFILES
Profiles capture all the detailed under-the-hood electronic/mechanical
aspects of the piano itself. Essentially, these include all the per-note settings
that are normally accessed under the lid of a hardware Rhodes piano by an
expert Rhodes technician.
The idea behind Profiles was to grant the user access to different full setups
of Rhodes pianos, a library of interesting options that respond differently and
offer their own characteristics.
Profiles save the current settings of the SETUP page, as well as the top row
of settings in the DETAIL page, excluding the Tuning parameter.
Presets and Profiles
There are two main file types within the Rhodes V8 and V8 Pro.
SELECTING, SAVING AND LOADING
Both Profiles and Presets have two buttons on the right of the preset name.
The leftmost acts to Save the setup, and the rightmost acts to Save As.
Pressing Save will capture the current settings and ask you if you want to
overwrite the current preset or profile with the same name (replace).
Each Preset will save a Profile within it. If you choose a Profile, leaving that
Profile’s settings untouched, and then save a Preset, the Preset will be
recalled faithfully.
However, if you have chosen a Profile, changed the Profile Settings and then
saved a Preset including it, the Profile saved within the Preset will revert to
the saved version, not the changed version.
IMPORTANT: To save your Preset with a changed Profile saved inside, first
save the Profile and then the Preset.
PRESETS
Presets globally save every single parameter on both the plugin’s front panel
as one file. This includes capture of advanced effects settings, Amp/Mic
selection, and also the current live parameters in the currently used Profile at
the time of saving. In other words, a Preset includes the Profile as well.
To Next Page
Loading...
