SECTION I: USER
26
I.9 MENU NAVIGATION
Cooling set point (°C).
Heating set point (°C).
Inlet water temperature (°C).
Outlet water temperature (°C).
Outdoor exchanger temperature (°C).
Transducer pressure (bar).
Phase tension L1 (V).
Phase tension L2 (V).
Pressing the UP and Down
keys at the same time will
memorize the set value.
Phase tension L3 (V).
Pressure transducer
disabled (default).
Pressure transducer
enabled (pressurized
defrosting).
Condensation control
enabled (proportional
fan) (default).
CC2 is only accessible if
CC1=y
Condensation control
disabled.
Summer / winter inlet disabled (default).
Summer / winter inlet enabled.
Enter password (technical assistance)
To Next Page
Loading...
Need help?
General
