Cod. CVA2137 - 01032018 - Rev. 01
Declaration of incorporation for partly completed machinery - Machinery Directive 2006/42/EC, Annex II., B
R.I.B. S.r.l. - Via Matteotti, 162 - 25014 Castenedolo - Brescia - Italy
Tel. ++39.030.2135811 - www.ribind.it - ribind@ribind.it
Apparatus model :
K500
Object of the declaration :
The following essential requirements of the Machinery Directive (2006/42/EC) are abided by and applied:
· The relevant technical documentation is compiled in accordance with Part B of Annex VII; such documentation, or parts of it, will be sent by post or by
electronic means, in response to a motivated request received from the qualified national authorities.
· This almost complete-machinery is conformed with the provisions of these others EC directives: Directives 2014/30/UE and 2014/35/UE.
· All relevant essential requirements as given in Annex I of the EU Directive 2006/42/EC have been applied to the product. Compliance with the cited
harmonized standards provides presumption of conformity with the specified essential requirements of the Directive covered by those Standards or
parts thereof.
WARNING: Other requirements and other EU Directives may be applicable to the products falling within the scope of this Declaration
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
- This product can not work alone and was designed to be fitted into a system made up of various other elements. Hence, it falls within Article 6,
Paragraph 2 of the EC-Directive 2006/42 (Machines) and following modifications, to which respect we point out the ban on its putting into service
before being found compliant with what is provided by the Directive.
(Bosio Stefano - Legal Representative)
EN 12453:2017
EN 12635:2002+A1:2008
EN 12978:2003+A1:2009
EN 13241-1:2016
EN 13849-1:2015 (pl b)
EN 13849-2:2012
EN 55014-1:2017
EN 55014-2:2016
EN 60335-1:2016
EN 60335-2-103:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 61000-6-1:2007
EN 61000-6-2:2005
EN 61000-6-3:2007+A1:2011
EN 61000-6-4:2007+A1:2011
Castenedolo, 01-03-2018
· This product has been completely developed and built in Italy
AUTOMATISMI PER CANCELLI
AUTOMATIC ENTRY SYSTEMS
To Previous Page
Loading...
Need help?
General
