33
1
TECHNICAL FEATURES
Ambidextrous irreversibile operator endowed with a control panel, used for the
intesive movement of boom arms from 3 to 6 m long.
The cabinet of the operator is treated with cataphoresis and thermal spray
coating.
The barrier boom can be supplied as a single piece or, in the case high objects
may hinder its travel, you can require it in the articulated version, specifying the
height of this obstacle from the ground.
The barrier boom with RIB profile is constructed for being fitted with a photocell
strip.
N.B. You must make installation features comply with laws and standards in
force.
ASSEMBLING RAPID N
After you have cemented in the base plate where you want it, mount RAPID N
using the nuts provided and a no. 19 hexagonal wrench.
Measurements
in mm/inch
280/11,2”x300/12”
6000/236”
1065/42”
1000/39”
TECHNICAL
DATA
RAPID N
Max. boom lenght m/in 6/236”
Opening time s 6
EEC Power supply 230V~ 50Hz 220V~ 60Hz
Motor capacity W 242 285
Power absorbed A 1,07 1,31
Capacitor µF 10
Max. torque Nm/ftlb 155/144 141/104
Power supply 120V~ 60Hz
Motor capacity W 186
Power absorbed A 2,07
Capacitor µF 25
Max. torque Nm/ftlb 105/77
Normative cycles 230V n° 2400 - 6s/2s
Normative cycles 120V n° 2400 - 6s/2s
Daily operations suggested n° 1500 for boom 3-4-5-6 m
Service % 100
Guaranteed consecutive cycles n° 1500 for boom 3-4-5-6 m
Lubrification SHELL OMALA S2 G100
Weight of electroreducer kg 62
Working Temperature °C -10 ÷ +55
Protection IP IP 54
G
B
SYSTEM LAY-OUT
Parts to install according to EN 12453 standard
COMMAND TYPE
USE OF THE SHUTTER
Skilled persons
(out of public area*)
Skilled persons
(public area)
Not skilled persons
Hold-to-run operation A B Not possible
Impulsive - in sight
(e.g. push-button)
C or E C or E C and D, or E
impulsive - out of sight (e.g. remote) C or E C and D, or E C and D, or E
automatic C and D, or E C and D, or E C and D, or E
* a typical example are those doors which do not have access to any public way
A: Hold-to-run operation made by push-button ex: code ACG2013
B: Hold-to-run operation made by key selector ex: code ACG1010
C: Adjustable power of the motor or photocells to respect impact forces as indicated in Annex A
D: Safety strips and/or other additional devices to reduce the probability of contact with the door.
E: Devices installed in such a way that a person can not be touched by the door.
- RAPID N barrier
- Photoelectric cells
- Galvanized column for P.E. cells
- Strip with Photoelectric cell
- Magnetic loop
2
To Next Page
Loading...
