Richmar TheraTouch CX2

Questions and Answers

J
Jenny JohnsonAug 19, 2025
How to fix Richmar Medical Equipment displays that fail to light up?
- R
  Robin HarrisAug 19, 2025
  If the displays on your Richmar Medical Equipment fail to light up, it may be due to adapter contact failure. Ensure the adapter is connected and check that all contacts are in place, not broken, and properly connected.
J
Jason WilsonAug 21, 2025
What to do if there is improper operation of the Richmar TheraTouch CX2 ultrasound head?
- K
  Kelsey SantosAug 21, 2025
  To resolve improper operation of the Richmar Medical Equipment ultrasound head, ensure you are using enough ultrasound gel on the applicator and moving it around as instructed in the manual. Allow the applicator to cool off, and then try again.
A
Allison MunozAug 25, 2025
What to do if Richmar TheraTouch CX2 Medical Equipment device does not follow setting parameters?
- F
  Francisco AnthonyAug 25, 2025
  If the Richmar Medical Equipment device does not follow the setting parameters, stop the electrotherapy and then restart the device.
H
hullthomasAug 26, 2025
What to do if the storage for favorites is full on Richmar Medical Equipment?
- C
  Christopher HurstAug 27, 2025
  If the storage for favorites is full on your Richmar Medical Equipment, delete some of the favorite programmings.
M
Michael SmithAug 28, 2025
What to do if Richmar Medical Equipment device cannot read the SD contents?
- A
  Amy JonesAug 28, 2025
  If the Richmar Medical Equipment device cannot read the SD contents, restart the device.
S
Stephanie BergAug 30, 2025
What to do if there is no electrode load detected on Richmar TheraTouch CX2?
- L
  Lisa BennettAug 30, 2025
  If there is no electrode load detected on your Richmar Medical Equipment, check the electrode pads and lead wires. You may need to change the lead wires or electrodes.
T
teresa14Sep 1, 2025
What to do if the self check has failed on Richmar Medical Equipment?
- S
  Steven GomezSep 1, 2025
  If the Richmar Medical Equipment self check has failed, restart the device.
X
xroseSep 3, 2025
What to do if the ultrasound applicator is not connected well on Richmar TheraTouch CX2 Medical Equipment?
- J
  Joseph MorganSep 3, 2025
  Check the connection of the Richmar Medical Equipment ultrasound applicator.
B
butlerjeremiahSep 5, 2025
What to do if the output current exceeds the setting current value on Richmar Medical Equipment?
- J
  Jacob LunaSep 5, 2025
  If the output current exceeds the setting current value on your Richmar Medical Equipment, restart the device.
J
Jessica WilcoxSep 8, 2025
What to do if the pulse duration of the output waveform exceeds the setting pulse duration value on Richmar Medical Equipment?
- G
  gguzmanSep 8, 2025
  If the pulse duration of the output waveform exceeds the setting pulse duration value on your Richmar Medical Equipment, restart the device.