How to fix Richmar Medical Equipment displays that fail to light up?
If the displays on your Richmar Medical Equipment fail to light up, it may be due to adapter contact failure. Ensure the adapter is connected and check that all contacts are in place, not broken, and properly connected.
Why is Richmar Medical Equipment stimulation uncomfortable?
Uncomfortable stimulation from Richmar Medical Equipment can occur for several reasons: the intensity might be too high (decrease intensity); the electrodes might be too close together (reposition the electrodes); the electrodes or lead wires might be damaged or worn (replace them); or the electrode active area size might be too small (replace electrodes with ones that have an active area no less than 2 inches).
What to do if Richmar Medical Equipment stimulation is weak?
If the stimulation from your Richmar Medical Equipment is weak, there could be a few reasons. The electrodes may be dried out or contaminated (replace them), or they may not be placed correctly (electrodes must be a minimum of 1.5 inches apart and no more than 6 inches per channel). Also, the lead wires might be old, worn, or damaged (replace them).
Why does Richmar Medical Equipment stimulation stop?
Stimulation from Richmar Medical Equipment might stop due to poor electrode contact (reapply electrodes, secure firmly) or damaged/worn electrodes or lead wires (replace them).
Defines the intended user and their qualifications for operating the device.
Highlights the importance of reading all warnings and precautions for patient safety.
Explains the meaning of DANGER, WARNING, and CAUTION symbols used in the manual.
Indicates a potentially hazardous situation leading to death or serious injury if not avoided.
Indicates a potentially hazardous situation leading to serious injury or equipment damage.
Lists conditions under which the device should not be used to ensure safety.
Lists individuals for whom the device is not recommended due to safety concerns.
Specifies areas on the body where electrodes must never be placed for safety.
Details crucial safety guidelines and precautions related to electrode usage.
Outlines specific incorrect methods of electrode application to avoid.
Provides essential general safety guidelines for operating the device.
Lists critical warnings related to the use of electrotherapy.
Lists critical warnings related to the use of ultrasound therapy.
Details specific cautions to be observed while operating the stimulator.
Provides general precautionary measures for device operation and use.
Details indications and contraindications for electrotherapy use.
Details indications and contraindications for ultrasound use.
Lists contraindications for heat therapy and ultrasound applications.
Explains the correct technique for moving the ultrasound applicator during treatment.
Lists potential adverse effects that may occur during ultrasound therapy.
Discusses patient sensitivity to ultrasound and the need for inspection.
Defines coupling and the use of conductive media for ultrasound transmission.
Defines key parameters used in electrotherapy and ultrasound settings.
Describes the IFC-4P waveform and its parameters for electrotherapy.
Describes the Premodulated (2 Pole) waveform and its parameters.
Describes TENS waveforms (Asymmetrical & Symmetrical Biphasic) and their parameters.
Describes the RAAS Biphasic waveform and its parameters for neuromuscular reeducation.
Describes Russian Stimulation waveform and its parameters for muscle strengthening.
Describes the High Volt waveform and its parameters for pain management.
Describes the Microcurrent waveform and its parameters for healing support.
Describes the NMS waveform and its parameters for muscle strengthening.
Lists parameters for ultrasound therapy settings.
Describes the TheraTouch EX4 device, its features, and electrotherapy capabilities.
Describes the TheraTouch CX4 device, combining electrotherapy and ultrasound.
Shows the initial Home Menu screen and navigation options.
Explains the layout and sections of the main therapy display screen.
Details the icons and functions of the touchscreen navigation bar.
Describes the electrotherapy treatment screen interface and its elements.
Describes the ultrasound treatment screen interface and its elements.
Describes the combination therapy screen interface and its elements.
Provides guidance on using flexible rubber electrodes and conductive medium.
Discusses self-adhesive electrodes and potential issues with current amplitude.
Explains potential reactions when connecting/disconnecting electrodes with CC mode.
Guides on setting up electrotherapy using clinical protocols.
Explains how to select channels for electrotherapy treatment.
Details how to adjust electrotherapy parameters using the control dial.
Guides on adjusting the treatment time for electrotherapy.
Explains how to start, pause, continue, and stop electrotherapy treatment.
Guides on saving and retrieving favorite treatment settings.
Guides on setting up electrotherapy using manual operation.
Explains how to select different current waveforms for electrotherapy.
Guides on selecting channels for electrotherapy treatment.
Details how to adjust electrotherapy parameters in manual mode.
Guides on adjusting treatment time in manual electrotherapy mode.
Explains starting, pausing, continuing, and stopping manual electrotherapy.
Guides on saving and retrieving favorite settings for electrotherapy.
Provides instructions on applying ultrasound therapy.
Explains the contact control function and its indicator.
Discusses the importance and types of contact media for ultrasound.
Lists pre-treatment steps for ultrasound application.
Provides guidance for moving the applicator and adjusting parameters during ultrasound.
Outlines post-treatment cleaning and patient feedback procedures.
Guides on setting up ultrasound using clinical protocols.
Guides on selecting and reviewing ultrasound clinical protocols.
Provides detailed information on selected ultrasound protocols.
Guides on adjusting ultrasound parameters.
Guides on adjusting treatment time for ultrasound.
Explains how to start, pause, continue, and stop ultrasound therapy.
Guides on saving and retrieving favorite ultrasound settings.
Guides on setting up ultrasound using manual operation.
Guides on using the manual operation mode for ultrasound.
Details how to adjust ultrasound parameters in manual mode.
Guides on adjusting treatment time in manual ultrasound mode.
Explains starting, pausing, continuing, and stopping manual ultrasound therapy.
Guides on setting up combination therapy using manual operation.
Guides on accessing unit functions from the Home Menu.
Guides on using the manual operation mode for combination therapy.
Guides on setting electrotherapy parameters for combination therapy.
Guides on adjusting treatment time and parameters for combination therapy.
Guides on setting ultrasound parameters for combination therapy.
Guides on adjusting treatment time for combination therapy.
Guides on saving and retrieving favorite combination therapy settings.
Guides on accessing and adjusting system settings like language and brightness.
Explains how current amplitude is displayed and depends on waveform.
Explains the Constant Current (CC) and Constant Voltage (CV) modes.
Explains current polarity for monophasic currents.
Provides instructions for cleaning the TheraTouch device.
Provides instructions for cleaning the device's display panel.
Recommends disinfecting rubber electrodes between patients.
Provides guidance on electrode care, storage, and lifespan.
Provides instructions for cleaning lead wires and cables.
Provides instructions for cleaning and disinfecting the ultrasound applicator.
Lists error codes, their reasons, and solutions for troubleshooting.
Outlines essential technical maintenance procedures and safety warnings.
Troubleshoots issues with the device display not lighting up.
Troubleshoots issues with weak or insufficient stimulation.
Troubleshoots issues where stimulation unexpectedly stops.
Troubleshoots causes for discomfort during stimulation.
Troubleshoots reasons for ineffective stimulation.
Discusses proper disposal and recycling of the device at the end of its life.
Lists relevant safety and performance standards the device complies with.
Details the medical device classification and relevant regulations.
Explains EMC precautions for medical electrical devices.
Provides guidelines for electromagnetic interference and environment.
Details guidance and declarations regarding electromagnetic immunity.
Provides guidelines for electromagnetic interference immunity.
Provides recommended separation distances for RF communication systems.
Provides a table of separation distances based on transmitter frequency and power.
Lists items and conditions excluded from the device warranty.
Excludes liability for indirect or consequential losses under the warranty.
Explains the significance of the serial number for date of manufacture.
General| Category | Medical Equipment |
|---|---|
| Timer | 1-60 minutes |
| Display | LCD |
| Combination Therapy | Yes |
| Intensity Levels | Adjustable |
| Warranty | 2 years |
| Device Type | Electrotherapy Device |
| Modes | TENS |
| Waveforms | Interferential, Premodulated, Russian |
| Channels | 4 |
| Output Modes | Continuous |
| Frequency Range | 1-150Hz |
| Pulse Width | 20-400 μs (Electrotherapy) |
| Presets | Multiple |
To Next Page
