OS of the device supporting the connection
OS Reference
Windows 10/11 page 19 "Connecting with Windows"
Android 9/10/11/12 page 22 "Connecting with Android"
Available functions vary depending on the OS. For details, see page 11 "Supported OS for Wireless
Connection".
Settings of this machine required for connection
Settings Reference
Dev. Info
*1
page 53 "Dev. Info"
*1
When the initial settings have already been made, there is no need to change the settings anew.
The machine can connect to a maximum of two devices wirelessly and can display screens from them at
a time. You can use a combination of the following methods to do this:
• Using the relevant OS function
• Using RICOH Monitor Mirroring for macOS/iOS
• Using RICOH Monitor Mirroring for Windows
• Wi-Fi setup is required when used in combination with an application to connect to devices in the
same network.
Using the Application to Connect to Devices in the Same Network
Use RICOH Monitor Mirroring for macOS or RICOH Monitor Mirroring for iOS to connect to devices in
the same network as this machine via an access point.
• This machine and the device must be connected to the same network (same subnet).
1. Connecting the Device via Wireless Connection
8
To Next Page
