3. Click the device name of the machine that you want to connect.
If RICOH Monitor Mirroring for macOS successfully communicates with this machine, a message
appears on the machine to confirm whether the connection is allowed or not.
If the device to be connected is already registered in the Connection list of this machine, the
message does not appear.
4. Confirm the name of the macOS device to be connected with the message displayed on
this machine, and then touch [OK].
The connection is started.
• By registering the information of a device in the Connection list, it can be connected to this machine
without having to allow the connection on the device. For details, see page 54 "Connection List".
1. Connecting the Device via Wireless Connection
30
To Next Page
Loading...