To Next PageTo Next PageWhat to do if my Ricoh 2020D - Aficio B/W Laser All in One Printer says 'Exceeded max. E-mail size'?
If you encounter the error 'Exceeded max. E-mail size. Sending E-Mail has been cancelled' on your Ricoh All in One Printer, increase the size of [Max. E-mail Size].
How to fix 'Cannot detect original size' on Ricoh All in One Printer?
If your Ricoh All in One Printer cannot detect the original size, try the following solutions: * Select the paper manually instead of using the Auto Paper Select function, and avoid using the Auto Reduce/Enlarge function. * Input both the horizontal and vertical sizes of the non-standard original. * Place the original on the exposure glass. * Ensure that you have placed the original document.
What to do if the delivery scanner function screen is not displayed on my Ricoh 2020D - Aficio B/W Laser All in One Printer?
If the network TWAIN scanner screen appears when the Ricoh All in One Printer is switched to scanner mode, press [Exit] to switch to the network delivery scanner screen. If the display does not switch from network TWAIN scanner to network delivery scanner, the delivery scanner settings are not correct.
What to do if my Ricoh 2020D - Aficio B/W Laser cannot detect original size?
If your Ricoh All in One Printer says 'Cannot detect original size Select scan size', place the original correctly and specify the scan size. Also, when placing an original directly on the exposure glass, the lifting/lowering action of the ADF triggers the automatic original size detection process.
How to fix no image results from scanning on Ricoh All in One Printer?
If your Ricoh All in One Printer is unable to scan and no image results are produced, make sure the original is placed correctly. When placing the original directly on the exposure glass, the side to be scanned must face down. When using the ADF, the side to be scanned must face up.
Why is the image distorted or out of position on my Ricoh 2020D - Aficio B/W Laser All in One Printer?
If the scanned image from your Ricoh All in One Printer is distorted or out of position, it could be due to movement during scanning. Ensure that the original remains still while scanning. Also, make sure the original is pressed flat against the exposure glass.
How to resolve dirty scanned images from my Ricoh 2020D - Aficio B/W Laser All in One Printer?
If your Ricoh All in One Printer produces scanned images that are dirty, the exposure glass or the exposure glass cover is likely dirty. Clean these parts to resolve the issue.
What to do if the scanned image is upside down on my Ricoh 2020D - Aficio B/W Laser?
If your Ricoh All in One Printer scans an image upside down, ensure that the original is placed in the correct orientation.
What to do if Ricoh All in One Printer cannot enter manually more than nnn destinations?
If your Ricoh All in One Printer displays an error indicating that you cannot enter manually more than nnn destinations, split the destinations into two or more groups.
What to do if Ricoh All in One Printer cannot specify more than 100 destinations?
If your Ricoh All in One Printer does not allow you to specify more than 100 destinations, split the destinations into two or more groups.
General| Copy Resolution | 600 x 600 dpi |
|---|---|
| Paper output capacity | 100 sheets |
| Duplex Printing | Manual |
| Energy saver mode | Yes |
| Functions | Print, Copy, Scan |
| Printing process | Laser |
| Print speed | 20 ppm |
| Scan Resolution | 600 x 600 dpi |
| Warm-up time | Less than 30 seconds |
| Paper input capacity | 250 sheets |
| Paper size | A4 |
| Interface | USB 2.0 |
| Power source | 220 - 240 V, 50/60 Hz |
