Ricoh 2020D - Aficio B/W Laser Copy Reference

11
Turning On the Power
This machine has two power switch-
es.
❖
❖❖
❖ Operation switch (right side of the
control panel)
Press to activate the machine.
When the machine has finished
warming up, you can operate the
machine.
❖
❖❖
❖ Main power switch (left side of the ma-
chine)
Turning off this switch makes the
main power indicator on the right
side of the control panel go off.
When this is done, machine power
is completely off.
When the fax unit (optional) is in-
stalled, fax files in memory may be
lost if you turn this switch off. Use
this switch only when necessary.
Note
❒ This machine automatically enters
Energy Saver mode or turns itself
off if you do not use it for a while.
See General Settings Guide.
Turning On the Main Power
A
AA
A
Make sure the power cord is firm-
ly plugged into the wall outlet.
B
BB
B
Turn on the main power switch.
The main power indicator goes on.
Important
❒ Do not turn off the main power
switch immediately after turn-
ing it on. Doing so may result in
damage to the memory, leading
to malfunctions.
Turning On the Power
A
AA
A
Press the operation switch.
The On indicator goes on.
Note
❒ If the power does not come on
when the operation switch is
pressed, check the main power
switch is on. If it is off, turn it on.
AAI027S
ZENH080E
KirC2_GBcopyF_FM.book Page 11 Friday, April 15, 2005 2:55 PM

Ricoh 2020D - Aficio B/W Laser Specifications

General

Copy Resolution	600 x 600 dpi
Paper output capacity	100 sheets
Duplex Printing	Manual
Energy saver mode	Yes
Functions	Print, Copy, Scan
Printing process	Laser
Print speed	20 ppm
Scan Resolution	600 x 600 dpi
Warm-up time	Less than 30 seconds
Paper input capacity	250 sheets
Paper size	A4
Interface	USB 2.0
Power source	220 - 240 V, 50/60 Hz