A-6 Safety Information
OG L 0 1
If your printer produces smoke, excessive heat, unusual noises or odors, or if any
liquid is spilled into the printer, immediately switch off and unplug the printer.
If the power cord is broken or insulated wires are exposed, be sure to get them
replaced. (Do not use the damaged cord.)
When unplugging the printer, grasp the plug instead of the cord.
Be sure to switch off and unplug the printer before accessing its interior for
cleaning or maintenance.
When the printer is not used over an extended period of time, switch it off and
unplug it.
Once a month, unplug the printer and check that:
the power cord is plugged firmly into a receptacle.
the power cord is not cracked or frayed.
the plug is not excessively heated, rusted, or bent.
the plug and receptacle are free of dust.
CAUTION!
Never unplug or replug the printer while it is on.
NOTE:
If you notice any unusual conditions, contact your service representative.
To Next Page
Loading...
