Ricoh 70 - Base Printer Specifications

B-2 Specifications
OG L 0 1
Specifications
Base Printer
Design and specifications are subject to change without notice.
Item Specification
Imaging Method Electro-Photography.
Exposure System Semiconductor 2 laser beam (laser diode) scanning.
Image Resolution 600 x 600 dots per inch (dpi).
Warm-up Time
Less than 240 seconds after deep sleep mode at
room ambient 68
o
F (20
o
C).
Continuous Print Speed in
Simplex mode from Tray 1
Up to 70 pages per minute (ppm) A4/Letter (LEF)
from Trays 1, 2, or 3. (70 ppm printer))
Up to 92 pages per minute (ppm) A4/Letter (LEF)
from Trays 1, 2, or 3. (92 ppm printer)
Printable Area Full size of the paper.
Controller Egret controller with PowerPC 750 375 MHz.
Maximum Monthly Duty
Cycle
Up to 400,000 prints.
Nominal Voltage 200 to 240 V.
Nominal Frequency 50 Hz or 60 Hz.
Power Consumption 10 A
Noise Level
65 dBA in operation.
54 dBA in standby.
Operating Temperature and
Humidity
Temperature range: 50 to 90 F (10 to 32 C).
Humidity range: 20-80% RH (no condensation).
Dimensions 1000 x 650 x 665mm (H x W x D).
Weight 374.7 lbs. (170 kg).
Memory Capacity 256 MB