3-4 Paper Handling
OG L 0 1
Loading Paper
Load paper into the trays according to the instructions that follow. See “Loading
Special Media” on page 3-11 for directions on loading prepunched and preprinted
paper, as well as tab stock. Paper can be loaded while a print job is running, except into
the tray that is currently in use.
Loading Paper in Tray 1
1. Open the tray by pulling it by the handle.
2. Adjust the size guide to the proper size. The available sizes are marked on the
tray.
WARNING!
Do not open Tray 1 if the Fuser Unit is pulled out. The printer may tip
over causing personal injury or damage to the printer.
To Next Page
Loading...
