Ricoh aficio 1013F - Facsimile Mode; Changing to Facsimile Mode; Sending a Fax; Printing a Received Fax

Facsimile Mode
9
1
Facsimile Mode
Changing to Facsimile Mode
You can always use the machine for
faxing when you are not using the
scanner function.
A
AA
A
Press the {
{{
{Facsimile}
}}
} key.
The fax display appears on the
panel display.
Note
❒ The Memory Transmission/Re-
ception function is performed
automatically even when an-
other function is being used.
You need not to switch the dis-
play. When data is received in
memory, the Receive File indi-
cator is lit.
Reference
For details, see the Facsimile
Reference manual.
Sending a Fax
Sending a fax while copying
A
AA
A
Press the {
{{
{Facsimile}
}}
} key to switch
to the fax display.
Note
❒ When you press the {
{{
{Facsimile}
}}
}
key while scanning originals or
sorting in Copy mode, remove
any originals of your copy job.
B
BB
B
Complete the usual operations
for sending a fax, and then press
the {
{{
{Start}
}}
} key.
C
CC
C
After the transmission has fin-
ished, press the {
{{
{Copy}
}}
} key.
D
DD
D
Reset the copy job originals, and
then press the {
{{
{Start}
}}
} key.
The machine resumes the inter-
rupted copy run.
Sending a fax while printing
A
AA
A
Press the {
{{
{Facsimile}
}}
} key to switch
to the fax display.
B
BB
B
Complete the usual operations
for sending a fax, and then press
the {
{{
{Start}
}}
} key.
Printing a Received Fax
When you are not copying, a received
fax is printed automatically. You do
not need to switch to Facsimile mode.
Stella-AE-SysF_V4_FM.book Page 9 Friday, December 20, 2002 11:39 PM