Ricoh Aficio 3035 - Deleting a Registered IP-Fax Destination

Fax Destination
85
5
C Press [Change] under TX SUB
Code.
D Enter the new SUB Code, and
then press [OK].
E To change the password, press
[Change] under Password
(SID).
F Enter the new password, and
then press [OK].
G Press [OK].
To change the SEP Code
A Press [Adv. Features].
B Press [SEP Code].
C Press [Change] under RX SEP
Code.
D Enter the new SEP Code, and
then press [OK].
E To change the password, press
[Change] under Password
(PWD).
F Enter the new password, and
then press [OK].
G Press [OK].
To change the protocol
A Select [H.323] or [SIP].
I Press [OK].
Deleting a Registered IP-Fax
Destination
Note
❒ If you delete a destination that is a
specified delivery destination,
messages to its registered Personal
Box, for example, cannot be deliv-
ered. Be sure to check the settings
in the fax function before deleting
any destinations.
❒ To delete a name entirely, see p.73
“Deleting a Registered Name”.
A Press the {User Tools/Counter} key.
B Press [System Settings].
C Press [ Administrator Tools ] , and then
press [TNext].
D Press [Address Book Management].
E Select the name whose IP-fax des-
tination you want to delete. Press
the name key, or enter the regis-
tered number using the number
keys.
Note
❒ If you press , you can search
by the registered name, user
code, fax number, folder name,
e-mail address, or IP-Fax desti-
nation.
❒ To delete the name, key display,
and title, see p.73 “Deleting a
Registered Name”.
F Press [Fax Dest.].
G Press [IP-Fax].
H Press [Change] under Facsimile
No..
I Press [Delete All], and then press
[OK].
J Press [OK].
K Press [Exit].
L Press the {User Tools/Counter} key.
AdonisC4-AE_zen_F_FM_forPaper.book Page 85 Thursday, May 12, 2005 3:32 PM