Registering Addresses and Users for Facsimile/Scanner Functions
94
5
F Press [Folder].
G Select the items you want to
change.
To change the protocol
A Press [FTP] or [NCP].
B A confirmation message ap-
pears. Press [Yes].
Note
❒ Changing the protocol will
clear all settings made under
the previous protocol.
C Enter each item again.
Reference
p.95 “To register an FTP fold-
er”
p.98 “To register an NCP
folder”
Changing items under SMB
A Press [Change] under Path.
B Enter the new path where the
folder is located, and then
press [OK].
Note
❒ You can also use Browse Net-
work to specify a new folder.
For details, see ]p.93 “Using
Browse Network to locate
the folder”
H Press [Connection Test] to check the
path is set correctly.
I Press [Exit].
Note
❒ If the connection test fails, check
the settings, and then try again.
J Press [OK].
K Press [Exit].
L Press the {User Tools/Counter} key.
Deleting a registered folder
Note
❒ To delete a name entirely, see p.75
“Deleting a Registered Name”.
A Press the {User Tools/Counter} key.
B Press [System Settings].
C
Press
[
Administrator Tools
]
, and then
press [TNext].
D Press [Address Book Management].
E Select the name whose folder you
want to delete.
Press the name key, or enter the
registered number using the
number keys.
Note
❒ If you press , you can search
by the registered name, user
code, fax number, folder name,
e-mail address, or IP-Fax desti-
nation.
❒ To delete the name, key display,
and title, see p.75 “Deleting a
Registered Name”.
F Press [Folder].
G Press the protocol which is not
currently selected.
A confirmation message appears.
H Press [Yes].
I Press [OK].
AdonisC4-EN_zen_F_FM_forPaper.book Page 94 Wednesday, May 11, 2005 4:02 PM
To Next Page
Loading...
