Troubleshooting
120
6
Document Server
Problem Solutions
"
Scanned pages exceeded max.
number. Do you want to store the
scanned pages as a file?
" appears.
The number of scanned pages exceeds the ca-
pacity per file of the Document Server.
To store scanned pages as a file, press [Store
File]. Scanned data is stored as a file in the Doc-
ument Server. If you do not want to store
scanned pages, press [No]. Scanned data is de-
leted.
You forgot your password. Contact the administrator.
You cannot find out what is stored in a file. Check the date or time column in the Docu-
ment Server: Select Files to Print display.
Check the document content by printing its
first page. Press the line of the desired docu-
ment in the Document Server: Select Files to
Print display, and then press [Print 1st Page]
followed by the {Start} key.
Memory frequently becomes full. Delete unnecessary files. On the file selection
display, select unnecessary files, and then
press [Delete]. If this does not increase availa-
ble memory, do the following.
• Switch to the scanner screen, and then de-
lete unnecessary files stored under the
scanner function.
• Switch to the printer screen, and then de-
lete unnecessary files stored under Sample
Print, Locked Print, Hold Print, or Stored
Print.
You want to check print quality before making
a large print run.
Check print quality by printing out only the
first set using the {Sample Copy} key.
"
Original is being scanned by
another function.
" appears.
The copier or scanner function is in use. To
cancel a job in progress, first press [Exit], and
then press the {Copy} key or {Scanner} key.
Next, press the {Clear/Stop} key. When the
message "
[Stop] key was
pressed.Stop printing?
" appears,
press [Stop].
AdonisC4-EN_zen_F_FM_forPaper.book Page 120 Wednesday, May 11, 2005 4:02 PM
To Next Page
Loading...
