Ricoh Aficio 3035 - Deleting a Registered Fax Destination

Registering Addresses and Users for Facsimile/Scanner Functions
84
5
To change the line
A Press [Select Line].
B Select the line.
C Press [OK].
To change the SUB Code
A Press [Adv. Features].
B Press [SUB Code].
C Press [Change] under TX SUB
Code.
D Enter the new SUB Code, and
then press [OK].
E To change the password, press
[Change] under Password
(SID).
F Enter the new password, and
then press [OK].
G Press [OK].
To change the SEP Code
A Press [Adv. Features].
B Press [SEP Code].
C Press [Change] under RX SEP
Code.
D Enter the new SEP Code, and
then press [OK].
E To change the password, press
[Change] under Password
(PWD).
F Enter the new password, and
then press [OK].
G Press [OK].
To change the fax header
A Press [Change] under Fax Head-
er.
B Select the new fax header, and
then press [OK].
To change the label insertion
A Press [Change] under Label In-
sertion.
B Press [Change] under Line 2.
C Select the new standard mes-
sage or press [Custom Message]
to enter the new message.
D Press [OK].
E Press [Change] under Line 3.
F Select the new standard mes-
sage, and then press [OK].
G Press [OK].
H Press [OK].
Note
❒ To change the name, key dis-
play and title, see p.75 “Chang-
ing a Registered Name”.
I Press [Exit].
J Press the {User Tools/Counter} key.
Deleting a Registered Fax
Destination
Note
❒ If you delete a destination that is a
specified delivery destination,
messages to its registered Personal
Box, for example, cannot be deliv-
ered. Be sure to check the settings
in the fax function before deleting
any destinations.
❒ To delete a name entirely, see p.75
“Deleting a Registered Name”.
AdonisC4-EN_zen_F_FM_forPaper.book Page 84 Wednesday, May 11, 2005 4:02 PM