Registering Folders
95
5
J Press [Exit].
K Press the {User Tools/Counter} key.
Using FTP to Connect
Note
❒ To register a shared folder config-
ured in Windows, see p.91 “Using
SMB to Connect”.
❒ To register a folder in an NetWare
server, see p.98 “Using NCP to
Connect”.
To register an FTP folder
A Press the {User Tools/Counter} key.
B Press [System Settings].
C
Press
[
Administrator Tools
]
, and then
press [TNext].
D Press [Address Book Management].
E Select the name whose folder you
want to register.
Press the name key, or enter the
registered number using the
number keys.
Note
❒ If you press , you can search
by the registered name, user
code, fax number, folder name,
e-mail address, or IP-Fax desti-
nation.
❒ To register the name, key dis-
play, and title, see p.74 “Regis-
tering Names”.
F Press [Auth. Info], and then press
[TNext].
G Press [Specify Other Auth. Info] on
the right side of Folder Authenti-
cation.
Note
❒ When [Do not Specify] is selected,
the SMB User Name and SMB
Password that you have speci-
fied in Default User Name /
Password (Send) of File Trans-
fer settings applies. For details,
see "Connecting and Setting
Up", Network Guide.
❒ If User Authentication is speci-
fied, contact your administra-
tor.
H Press [Change] under Login User
Name.
I Enter the login user name, and
then press [OK].
Note
❒ You can enter up to 64 charac-
ters for the user name.
Reference
p.161 “Entering Text”
J Press [Change] under Login Pass-
word.
K Enter the password, and then
press [OK].
Note
❒ You can enter up to 64 charac-
ters for the password.
L Enter the password again to con-
firm, and then press [OK].
M Press [Folder].
AdonisC4-EN_zen_F_FM_forPaper.book Page 95 Wednesday, May 11, 2005 4:02 PM
To Next Page
Loading...
