Settings You Can Change with User Tools
59
4
❖ Tray Paper Size: Tray 1–4
Select the size of the paper loaded in the paper tray.
• The paper sizes you can set for Tray 1 to Tray 4 are as follows:
•A3L, B4 JIS (Japanese Industrial Standard)L, A4K, A4L, B5 JISK, B5
JISL, A5L
•11"×17"L, 8
1
/
2
"×14"L, 8
1
/
2
"×13"L, 8
1
/
2
"×11"K, 8
1
/
2
"×11"L,
8
1
/
4
"×13"L, 8
1
/
4
"×14"L, 11"×14"L, 8"×13"L, 7
1
/
4
"×10
1
/
2
"L,
8"×10
1
/
2
"K, 8"×10
1
/
2
"L, 5
1
/
2
"×8
1
/
2
"L
Important
❒ If the specified paper size differs from the actual size of the paper loaded
in the paper tray, a misfeed might occur because the correct paper size was
not detected.
Note
❒ Default:
•Tray 1: A4K, 8
1
/
2
" × 11"K
•Tray 2: A3L, 11" × 17"L
•Tray 3: A4L, 8
1
/
2
" × 11"L
•Tray 4: A4L, 8
1
/
2
" × 14"L
❒ The paper guide for the optional LCT is fixed for A4K, 8
1
/
2
" × 11"Ksize
paper. Contact your service representative if you need to change the paper
size.
❒ If the paper size set for the selector in the paper tray is different to the pa-
per size for this setting, the paper size of the selector has priority.
❒ If you load paper of a size not indicated on the paper size selector in the
paper tray, set the selector to "p".
Reference
p.136 “Changing the Paper Size”
❖ Paper Type: Bypass tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
• The paper types you can set for the bypass tray are as follows:
• recycled paper, special paper, color paper, letterhead, label paper, pre-
punched paper, bond paper, cardstock, thick paper, OHP
Note
❒ Default: No Display
AdonisC4-EN_zen_F_FM_forPaper.book Page 59 Wednesday, May 11, 2005 4:02 PM
To Next Page
Loading...
