Settings You Can Change with User Tools
61
4
❖ Front Cover Sheet Tray
Allows you to specify and display the paper tray that is setting cover sheets.
After selecting the paper tray, you can also specify the display timing and
copy method for two-sided copying.
Note
❒ Default:
•Tray to Program: Off
❒ Functions using the cover sheet tray setting are the front cover function
and front/back cover function.
❒ When [At Mode Selected] is selected, cover sheet tray settings only appear
when the cover function or slip sheet function is selected.
❒ When [Full Time] is selected, the cover sheet tray is always displayed.
❒ You can set Copying Method in Duplex only when [At Mode Selected] is se-
lected.
Reference
“Covers”, Copy Reference
❖ Slip Sheet Tray
Allows you to specify and display the paper tray that is inserting slip sheets.
After selecting the paper tray, you can also specify the display timing and
copy method for two-sided copying.
Note
❒ Default:
•Tray to Program: Off
❒ When [At Mode Selected] is selected, slip sheet tray settings only appear
when the cover function or slip sheet function is selected.
Reference
"Slip Sheets", Copy Reference
❖ Printer Bypass Paper Size
You can specify the size of the paper in the bypass tray when printing data
from the computer.
• The paper types you can set for trays are as follows:
A3L, A4K , A4L, A5K, A5L, A6L, B4 JISL, B5 JISK, B5 JISL, B6
JISL, C5 EnvK , C6 EnvK, DL EnvK, 12" × 18"L, 11" × 17"L, 8
1
/
2
" ×
14"L, 8
1
/
2
" × 13"L, 8
1
/
2
" × 11"K, 8
1
/
2
" × 11"L, 8
1
/
4
" × 13"L, 8" × 13"L,
7
1
/
4
" × 10
1
/
2
"K, 7
1
/
4
" × 10
1
/
2
"L, 5
1
/
2
" × 8
1
/
2
"K, 5
1
/
2
" × 8
1
/
2
"L, 4
1
/
8
" ×
9
1
/
2
"K, 3
7
/
8
" × 7
1
/
2
"K, 8KL, 16KK, 16KL
Note
❒ Default:8
1
/
2
"
×
11"K
❒ You can specify a custom size of between 90.0 and 297.0 mm (3.6"-11.7")
vertically, and between 148.0 and 432.0 mm (5.9"-17.0") horizontally.
AdonisC4-EN_zen_F_FM_forPaper.book Page 61 Wednesday, May 11, 2005 4:02 PM
To Next Page
Loading...
