Ricoh Aficio G7500 - 2 Installing the Paper Feed Unit (Option); Paper Feed Unit Type 7500

17
2
2. Installing the Paper Feed Unit
(option)
Paper Feed Unit Type 7500
Follow the procedure below to install Paper Feed Unit Type 7500.
1 Check that the power cord of the printer is not plugged in.
2 Take the paper feed unit out of its box.
3 Position the paper feed unit close to the printer.
4 Remove the orange tape from tray 2.
5 Remove the paper from the roller at the rear of tray 2 by pulling the attached orange tape.
6 Place the cover on tray 2.
z
The machine weighs approximately 14.2 kg (31.3 lb.).
z
When moving the machine, hold it using the hand recesses at the bottom
center of each side, and then lift it slowly and carefully. Lifting the
machine carelessly or dropping it may cause injury.
AGK069S