Printing > Adjusting Print Quality > Printing with Print Quality Settings You Want > Correcting the Hue of Digital Photos
Correcting the Hue of Digital Photos
Correct the hue of digital photos. This is effective especially for overexposed or underexposed images.
● Exposure is affected by the levels of light in which the photo was taken. If there are extreme light and shade differences between object and
background, the object may be underexposed (too dark) or overexposed (too light).
Open the file you want to print from the application, and then open the printer properties dialog box.
On the [Setup] tab, click [User settings] in the [Print Quality] area.
Click [Change...].
The [Change User Settings] dialog box appears.
On the [Image Adjustments] tab, select the [Adjust photos and images] check box.
● If the [Adjust photos and images] check box is selected, the [Use ICM] check box is unavailable.
Click [OK].
The [Change User Settings] dialog box closes.
Make the necessary settings, and then click [OK].
The printer properties dialog box closes.
Make print settings, and then click [OK].
● Opening from an Application
Top Previous Next
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0020.htm2005/10/05 12:03:06
To Next Page
Loading...
