Reserved Job Waiting Time
You can specify how long the machine waits to receive a print job before allowing other functions
such as the copier and scanner functions to interrupt it.
The default setting is Short Wait.
Printer Language
Specify the printer language.
The default setting is Auto.
This menu will appear under the following conditions:
• The PostScript 3 option is installed.
• Both the PostScript 3 and PCL options are installed.
Sub Paper Size
You can enable the Auto Substitute Paper Size (A4, LT) feature.
The default setting is Off.
Page Size
You can select the default paper size.
• The paper size you can select is as follows:
"A3", "A4", "A5", "A6", "B4 JIS", "B5 JIS", "B6 JIS", "12 18", "11 17", "8
1
/
2
14", "8
1
/
2
13", "8
1
/
2
11", "8
1
/
4
13", "8 13", "7
1
/
4
10
1
/
2
", "5
1
/
2
8
1
/
2
", "8K", "16K", "Custom
Size"
The default setting is A4 (Metric version) / 8
1
/
2
" 11" (Inch version).
Letterhead Setting
You can rotate original images when printing.
When printing, original images are always rotated by 180 degrees. Therefore, output might not be
as expected when printing onto letterhead or preprinted paper requiring orientation. Using this
function, you can specify image rotation.
The default setting is Off.
When set to Off, original images are rotated by 180 degrees.
When set to Auto Detect, the machine detects a letterhead or preprinted paper automatically, and
does not rotate the image.
When set to On (Always), the machine does not rotate the image.
This function reduces printing speed.
Bypass Tray Setting Priority
Specify whether (Printer) Driver / Command or Machine Settings, has priority for determining the
paper size for the bypass tray.
The default setting is Driver / Command.
System
205