Ricoh Aficio MP 3500 - Programming Initial Set up of a Special Sender

Special Senders to Treat Differently
147
4
Programming Initial Set Up of a Special Sender
This section describes how to program Initial Set Up of a Special Sender.
Program the “Initial Set Up” of a Special Sender. You can also specify the Bypass
Tray Paper Size.
A Press [Facsimile Features].
B Press [Administrator Tools].
C Press [TNext].
D Press [Program Special Sender].
E Press [Initial Set Up].
F Select the function you want to program.
In this feature, “Authorized RX” has the same settings as “Reception Settings”.
See "Reception Settings".
G Press [Exit].
H Press the {User Tools/Counter} key.
Reference
p.99 “Reception Settings”