Registering Folders
225
7
Changing a SMB Folder
This section describes how to change settings of the registered SMB folder.
A Press [System Settings].
B Press [Administrator Tools].
C Press [TNext].
D Press [Address Book Management].
E Check that [Program / Change] is selected.
F Select the name whose folder you want to change.
Press the name key, or enter the registered number using the number keys.
If you press , you can search by the registered name, user code, fax number,
folder name, e-mail address, or IP-Fax destination.
G Press [Folder].
H Select the items you want to change.
I Press [Connection Test] to check the path is set correctly.
J Press [Exit].
Note
❒ To change the name, key display and title, see “Changing a Registered Name”.
❒ If the connection test fails, check the settings, and then try again.
Reference
p.194 “Changing a Registered Name”
p.226 “Changing the registered SMB folder”
p.226 “To change the protocol”
To Next Page
Loading...
