Registering Folders
229
7
L Enter the password, and then press [OK].
M Enter the password again to confirm, and then press [OK].
N Press [Folder].
O Press [FTP].
P Press [Change] under "Server Name".
Q Enter the server name, and then press [OK].
R Press [Change] under "Path".
S Enter the path, and then press [OK].
You can enter an absolute path, using this format: “/user/ home/username";
or a relative path, using this format: “directory/sub-directory".
If you leave the path blank, the login directory is assumed to be the current
working directory.
You can also enter an IP address.
You can enter a path using up to 128 characters.
T To change the port number, press [Change] under "Port No".
U Enter the port number using the number keys, and then press the {q} key.
You can enter 1 to 65535.
V Press [Connection Test] to check the path is set correctly.
W Press [Exit].
If the connection test fails, check the settings, and then try again.
X Press [OK].
To Next Page
Loading...
