Administrator Tools
71
2
To enter a port number
This section describes how to enter a port number.
A Press [Change] under "Port No.".
Specify the port number for communicating with the LDAP server. Specify a
port that is compliant with your environment.
B Enter the port number using the number keys, and then press the {q} key.
When SSL is set to [On], the port number automatically changes to “636”.
To start SSL communication
This section describes how to specify SSL communication.
A Press [On] under "Use Secure Connection (SSL).
Use SSL to communicate with the LDAP server.
To use SSL, the LDAP server must support SSL.
When SSL is set to [On], the port number automatically changes to “636”.
SSL setting must be enabled on this machine. For details, consult your net-
work administrator.
To set authentication
This section describes how to specify authentication.
To make a search request to the LDAP server, use the administrator account for
authentication.
A Press [TNext].
B Press [On] or [High Security] under "Authentication".
Authentication settings must comply with your server’s authentication set-
tings. Check your server settings before setting this machine.
[High Security] is available only with LDAP Version 3.0.
When [High Security] is selected, the administrator password is encrypted be-
fore it is sent to the network. When [On] is selected, the password is sent with-
out encryption.
To Next Page
Loading...
