3. Copy
This chapter describes frequently used copier functions and operations. For the information not included
in this chapter, see Copy/ Document Server on the supplied CD-ROM.
Basic Procedure
To make copies of originals, place them on the exposure glass or in the ADF.
When placing the original on the exposure glass, start with the first page to be copied. When placing
the original in the ADF, place them so that the first page is on the top.
(mainly Europe and Asia)
About placing the original on the exposure glass, see p.55 "Placing Originals on the Exposure Glass
(mainly Europe and Asia)".
(mainly North America)
About placing the original on the exposure glass, see p.55 "Placing Originals on the Exposure Glass
(mainly North America)".
About placing the original in the ADF, see p.56 "Placing Originals in the Auto Document Feeder".
To copy onto paper other than plain paper, specify the paper type in User Tools according to the weight
of the paper you are using. For details, see "System Settings", Connecting the Machine/ System Settings
.
1. Make sure "Copier" appears on the screen.
If any other function is displayed, press the [Home] key on the top left of the control panel, and
press the [Copier] icon on the [Home] screen.
2. Make sure no previous settings remain.
When there are previous settings remaining, press the [Reset] key.
3. Place the originals.
4. Make desired settings.
59
To Next Page
Loading...
Need help?
General
