• You cannot use the bypass tray with this function.
Original orientation and staple position
Place all the originals in the ADF in the orientation in which they can be read normally. When
placing the original on the exposure glass, keep the same orientation, but place the original facing
downwards.
When the paper that is loaded is the same size and orientation as the original, the relationship
between the orientation in which you place the original and the staple positions is as follows. You
can confirm the staple positions that can be selected on the screen that appears when [Finishing] is
pressed.
Placing the original on
the exposure glass
Placing the original in the
ADF
Staple position
*1
Top 1
Slant
To Next Page
Loading...
Need help?
General
