Page 84 of 93 
Copyright (c) 2012 RICOH COMPANY, LTD. All rights reserved. 
Table 36 : Unlocking Administrators for Each User Role 
User Roles (Locked out Users)  Unlocking Administrators 
Normal user  MFP administrator 
Supervisor MFP administrator 
MFP administrator  Supervisor 
FIA_SOS.1 
Login passwords for users can be registered only if these passwords meet the following conditions: 
(1)  Usable characters and types: 
Upper-case letters: [A-Z] (26 letters) 
Lower-case letters: [a-z] (26 letters) 
Numbers: [0-9] (ten digits) 
Symbols: SP (space) ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~ (33 symbols) 
(2) Registrable password length: 
- For normal users 
No less than the minimum character number for password (8-32 characters) specified by the MFP 
administrator and no more than 128 characters. 
- For MFP administrators and a supervisor 
No less than the minimum character number for password (8-32 characters) specified by the MFP 
administrator and no more than 32 characters. 
(3)  Combination of character types: 
The number of combined character types specified by the MFP administrators (two types or more, or 
three types or more). 
FIA_UAU.2, FIA_UID.2, and FIA_USB.1 
A certificate is a set of identification and authentication information of RC Gate. 
When the TOE receives a certificate from an IT device to access the TOE via RC Gate communication 
interface, the TOE checks if the certificate matches another certificate installed in the TOE. Only if the 
certificate sent from the IT device matches the one installed in the TOE so that the IT device is identified as 
RC Gate, the IT device whose user role is RC Gate is allowed to use the TOE. 
FPT_FDI_EXP.1 
The TOE inputs information after the TSF reliably identifies and authenticates the input information from the 
Operation Panel or the client computer via LAN interface. Therefore, the input information cannot be 
forwarded unless the TSF is not involved in information identification and authentication. 
7.3  Document Access Control Function 
The Document Access Control Function is to allow authorised TOE users to operate document data and user 
jobs in accordance with the provided user role privilege or user privilege.