Ricoh Aficio MP 5002 - Placing Originals in the Auto Document Feeder

CJW001
1
1
1. Positioning mark
3. Lower the ADF.
Placing Originals in the Auto Document Feeder
Be sure not to block the sensor or load the original untidily. Doing so may cause the machine to detect
the size of the original incorrectly or display a paper misfeed message. Also, be sure not to place
originals or other objects on the top cover. Doing so may cause a malfunction.
CJW004
1
1. Sensors
1. Adjust the original guide to the original size.
2. Set the aligned originals squarely face up in the ADF.
Do not stack originals beyond the limit mark.
The first page should be on the top.
2. Getting Started
56