Ricoh Aficio MP 7000 Network Guide

Using SmartDeviceMonitor for Admin
49
2
Checking the Machine Status
Follow the procedure below to check
machine status.
A Start SmartDeviceMonitor for Admin.
B On the [Group:] menu, point to
[Search Device], and then click
[TCP/IP], [IPX/SPX] or [TCP/IP SNMPv3].
A list of machines using the select-
ed protocol appears.
Select the protocol of the machine
whose configuration you want to
change.
If you are using TCP/IP SNMP v3,
enter the user authentication.
C To obtain status details, select the
machine in the list, and then click
[Open] on the [Device] menu.
The machine status appears in the
dialog box.
D Click [System] or [Printer].
The machine status appears in the
dialog box.
E Quit SmartDeviceMonitor for Admin.
Note
❒ For details about items in the di-
alog box, see SmartDeviceMon-
itor for Admin Help.
Changing Names and Comments
Follow the procedure below to
change the names and comments of
the machine.
A Start SmartDeviceMonitor for Admin.
B On the [Group:] menu, point to
[Search Device], and then click
[TCP/IP], [IPX/SPX] or [TCP/IP SNMPv3].
A list of machines using the select-
ed protocol appears.
Select the protocol of the machine
whose configuration you want to
change.
If you are using TCP/IP SNMP v3,
enter the user authentication.
C Select a machine in the list, and
then click [NIB Setup Tool] on the
[Tools] menu.
A Web browser opens and the
window for entering the login user
name and password for the Web
Image Monitor administrator ap-
pears.
NIB Setup Tool starts when the
network interface board is default.
Follow the instructions on the
screen.

Ricoh Aficio MP 7000 Specifications

General

Brand	Ricoh
Model	Aficio MP 7000
Category	All in One Printer
Language	English