Mac OS X
61
2
D Select the connected printer from the list of printer models, and then click
[Add].
E Quit Printer Setup Utility.
Note
❒ When printing with a USB connection to a Macintosh computer, printer
language does not change automatically. Use the control panel on this
printer to change printer language to [Auto Detect] or [PS] before printing.
❒ USB2.0 can be used only with Mac OS X 10.3.3 or higher.
Using Bonjour (Rendezvous)
Follow the procedure below to print using Bonjour (Rendezvous) under Mac OS
X 10.2.3 or higher. Ethernet, wireless LAN and IEEE 1394 (IP over 1394) connec-
tions can also be used.
A Start Printer Setup Utility.
B Click [Add].
❖ Mac OS X 10.4 or later
Click a printer that has "Bonjour" indicated in the "Connection" column.
If the zone is set, click [More Printers...], and then select the zone from the
second pop-up menu.
❖ Other Mac OS X
Click [Rendezvous] on the pop-up menu.
If the zone is set, select the zone from the second pop-up menu.
C Select the name of the connected printer from the list of printer models, and
then click [Add].
Under Mac OS X 10.4 or later, Installable Options window appears. Select the
option you want to set up, and then select an appropriate setting for it, and
then [Continue].
D Quit Printer Setup Utility.
Note
❒ When printing with a Rendezvous connection to a Macintosh computer,
printer language does not change automatically. Use the control panel on
this printer to change printer language to [Auto Detect] or [PS] before print-
ing.
To Next Page
Loading...
Need help?
General
