6. Front cover
Open to access the inside of the machine.
7. Paper trays (trays 1 2)
Load paper here.
8. Lower paper trays (optional)
Load paper here.
9. Operation switch
Press to turn the power on (the operation switch indicator lights up). To turn the power off, press again (the
operation switch indicator goes off). See “Turning On/Off the Power”.
Front and right view
1. Ventilation holes
Prevent overheating.
2. Right tray (optional)
3. Bypass tray
Use to copy or print on OHP transparencies, label paper (adhesive labels), envelopes and custom size paper.
4. Extender
Pull this extender out when loading sheets larger than A4 in the bypass tray.
5. Lower right cover
Open this cover when a paper jam occurs.
2. Getting Started
46
To Next Page
Loading...
