Registering Addresses and Users for Facsimile/Scanner Functions
228
7
G Press [Change] under ”Fax Destination”.
H Enter the new destination, and then press [OK].
I Press [OK].
J Press [OK].
Note
❒ To change the name, key display and title, see “Changing a Registered
Name”.
Reference
p.207 “Changing a Registered Name”
“Entering Text”, About This Machine
Using the IP–Fax Destination as the sender
A Press [Protection].
B Press [Sender] under [Use Name as].
To change the IP-Fax Destination
A Press [Change] under [Use Name as].
B Enter the new destination, and then press [OK].
To select the protocol
A Press [Select Line].
B Select [H.323] or [SIP].
To Next Page
Loading...
