2. Press [Tray Paper Settings].
3. Press [ Next].
4. Press [Paper Type: Bypass Tray].
5. Select the proper items, according to the paper type you want to set.
• Press [OHP (Transparency)] on the [Paper Type] area when loading OHP transparencies.
• To load thin or thick paper, press [Do not Display] on the [Paper Type] area, and then select
the appropriate paper thickness in the [Paper Thickness] area.
6. Press [OK].
7. Press the [User Tools/Counter] key.
• We recommend that you use specified OHP transparencies.
• For details about paper thickness, see "System Settings", Connecting the Machine/ System Settings
.
Loading Paper into the Bypass Tray
141
To Next Page
Loading...
