Ricoh Aficio MP C3501 Manual

Page 12 of 93
Copyright (c) 2011 RICOH COMPANY, LTD. All rights reserved.
Figure 2 : Hardware Configuration of the TOE
Controller Board
The Controller Board is a device that contains Processors, RAM, NVRAM, Ic Key, and FlashROM. The
Controller Board sends and receives information to and from the units and devices that constitute the MFP,
and this information is used to control the MFP. The information to control the MFP is processed by the
MFP Control Software on the Controller Board. The following describes the components of the Controller
Board:
- Processor
A semiconductor chip that performs basic arithmetic processing for MFP operations.
- RAM
A volatile memory medium which is used as a working area for image processing such as
compressing/decompressing the image data. It can also be used to temporarily read and write
internal information.
- NVRAM
A non-volatile memory medium in which TSF data for configuring MFP operations is stored.
- Ic Key
A security chip that has the functions of random number generation, cryptographic key generation

Ricoh Aficio MP C3501 Specifications

General

Print Technology	Laser
Print Speed (Color)	35 ppm
Print Speed (Monochrome)	35 ppm
Maximum Print Resolution	1200 x 1200 dpi
Standard Paper Capacity	1, 200 sheets
Maximum Paper Capacity	4, 400 sheets
Duplex Printing	Yes
Maximum Scan Resolution	600 dpi
Copier Resolution	600 dpi
Fax Capability	Optional
Memory (Maximum)	1.5 GB
Network Connectivity	Ethernet
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Functions	Print, Copy, Scan
Hard Disk Drive	160 GB
Scan Speed	50 ipm
Operating System Compatibility	Windows, Mac, Linux