Ricoh Aficio MP C4000 User Manual

Registering the Initial Display's Default Functions
You can configure the settings of the initial screen so that the default display contain the functions you use
most often.
For example: if the default selection is the Duplex function, but the function you use most frequently is 1-
sided copying, you can change the default selection to 1-sided copying instead.
The settings you can program as defaults are Colour Mode, Paper Tray, Original Type, Density, Special
Original, Original Orientation, Cover/Slip Sheet, Edit / Colour, Dup./Combine/Series, Reduce /
Enlarge, Finishing, and the number of copies.
1. Specify scan settings and any other settings you require on the initial display.
2. Press the [Program] key.
BCU051S
3. Press [Program as Defaults].
Registering the Initial Display's Default Functions
105
2

Ricoh Aficio MP C4000 Specifications