Ricoh Aficio MP C4000 User Manual

5. Enter the vertical size of the original with the number keys, and then press [ ].
6. Enter the vertical size of the copy with the number keys, and then press [ ].
7. Press [OK] twice.
• To change the value you entered, press the key you want to change, and then enter a new value.
• The reproduction ratio you can specify are 25 - 400%.
• When entering a size in mm (inch), if the calculated ratio is over the maximum or under the minimum
ratio, it is automatically adjusted to within available range. However, with some ratios, parts of the
image might not be copied or margins will appear on copies.
Create Margin
Reduces the image to 93% of its original size and places the reduced image at the centre. By combining
it with the Reduce/Enlarge functions, you can further increase a margin.
1. Press [Create Margin].
2. Select the reproduction ratio, if necessary.
• You can change the ratio for Create Margin under Reproduction Ratio in User Tools. For details about
Reproduction Ratio, see “Reproduction Ratio”.
• p.219 "Reproduction Ratio"
4. Advanced Copying
138
4

Ricoh Aficio MP C4000 Specifications