Changing the Extended Security Functions
157
6
❖ Password Policy
This can be specified by the user administrator.
The password policy setting is effective only if [Basic Auth.] is specified.
This setting lets you specify [Complexity Setting] and [Minimum Character No.] for
the password. By making this setting, you can limit the available passwords
to only those that meet the conditions specified in [Complexity Setting] and [Min-
imum Character No.].
If you select [Level 1], specify the password using a combination of two types
of characters selected from upper-case letters, lower-case letters, decimal
numbers, and symbols such as #.
If you select [Level 2], specify the password using a combination of three types
of characters selected from upper-case letters, lower-case letters, decimal
numbers, and symbols such as #.
❖ @Remote Service
Communication via HTTPS for @Remote Service is disabled if you select [On].
•Prohibit
• Do not Prohibit
Note
❒ Default: Do not Prohibit
ApollonC1-GB_Sec_F_FM_forPaper.book Page 157 Thursday, March 30, 2006 12:47 PM
To Next Page
Loading...
