Authentication and its Application
56
2
M Press [Change] for "Login Name Attribute".
N Enter the login name attribute , and then press [OK].
Note
❒ You can use the Login Name Attribute as a search criterion to obtain infor-
mation about an authenticated user. You can create a search filter based on
the Login Name Attribute, select a user, and then retrieve the user infor-
mation from the LDAP server so it is transferred to the machine’s address
book. The method for selecting the user name depends on the server envi-
ronment. Check the server environment and enter the user name accord-
ingly.
O Press [Change] for "Unique attribute".
ApollonC1-GB_Sec_F_FM_forPaper.book Page 56 Thursday, March 30, 2006 12:47 PM
To Next Page
Loading...
