Authentication and its Application
60
2
G Enter the server name, and then press [OK].
Enter the IPv4 address or host name.
H In "Authentication Type", select the authentication system for external au-
thentication.
Select an available authentication system.
I Press [Change] for "Domain Name".
J Enter the domain name, and then press [OK].
Note
❒ You cannot specify a domain name under an authentication system that
does not support domain login.
ApollonC1-GB_Sec_F_FM_forPaper.book Page 60 Thursday, March 30, 2006 12:47 PM
To Next Page
Loading...
