User Authentication
63
2
P Specify the range in which [Simple (Limitation)] is applied to Printer Job Au-
thentication.
You can specify the IPv4 address range to which this setting is applied, and
whether or not to apply the setting to the parallel and USB interfaces.
Q Press [Exit].
R Press [On] for “SSL” and then press [OK].
To not use secure sockets layer (SSL) for authentication, press [Off].
S Press the {User Tools/Counter} key.
ApollonC1-GB_Sec_F_FM_forPaper.book Page 63 Thursday, March 30, 2006 12:47 PM
To Next Page
Loading...
