Message Causes Solutions
"File being stored exceeded
max. number of pages per
file. Copying will be
stopped."
The scanned originals have
too many pages to store as
one document.
Press [Exit], and then store again with
an appropriate number of pages.
"Magazine or Booklet mode
is not available due to mixed
image mode."
You selected the "Magazine"
or "Booklet" function for
originals scanned using
different functions, such as
copy and printer.
Make sure originals for the
"Magazine" or "Booklet" function are
scanned using the same function.
"Magazine or Booklet mode
is not available due to mixed
colour modes."
You selected the "Magazine"
or "Booklet" function for
originals stored using copier
function with different color
mode, such as full color mode
and black & white mode.
Make sure originals for the
"Magazine" or "Booklet" function are
stored using the same color mode.
"Magazine or Booklet mode
is not available due to mixed
colour modes."
You selected the "Magazine"
or "Booklet" function for
originals stored using printer
function with different color
mode, such as full color mode
and black & white mode.
Make sure originals for the
"Magazine" or "Booklet" function are
stored using the same color mode.
However, you can select the
"Magazine" or "Booklet" function for
a single original stored using printer
function with different color mode.
"Maximum number of sets is
n."
(A figure is placed at n.)
The number of copies exceeds
the maximum copy quantity.
You can change the maximum copy
quantity from [Max. Copy Quantity]
in [General Features] under
[Copier / Document Server
Features]. For details about Max.
Copy Quantity, see "General
Features", Copy/ Document Server
.
10. Troubleshooting
178
To Next Page
Loading...
Need help?
General
