Printing a Document
53
3
How to Use Sample Print
Follow the procedure below to print a document using the Sample Print function.
Windows 95 / 98 / Me
A In the application, on the [File] menu, click [Print].
The [Print] dialog box appears.
B Select the printer, and then click [Properties...].
C Click the [Setup] tab.
D In the [Job Type:] list, click [Sample Print].
E Click [Details...].
F In the [User ID:] box, enter a user ID using up to eight alphanumeric (a-z, A-Z,
0-9) characters.
The user ID associates the user with his / her jobs.
G Click [OK].
H Click [OK] to close the printer properties dialog box.
I Set the number of copies to two or more, and then start the printing from
the application's [Print] dialog box.
The sample print job is sent to the machine and one set is printed.
J Check the printed output to make sure the settings are correct.
If the settings are correct, perform the following steps.
If you want to delete a saved job, see p.57 “Deleting a Sample Print File”.
K On the machine's control panel, press the {Printer} key to display the printer
screen.
L Press [Print Jobs].
M Press [Sample Print Job List].
A list of sample print files stored in the machine appears.
User ID, Date / Time and File Name also appear.
N Select the file you want to print by pressing it.
A list of the print files stored in the machine appears.
O Press [Print] to change the number of sets to be printed.
To Next Page
Loading...
